低压变频器

Input frequency

47~63Hz

Output

Output voltage

0～Rated voltage

Output frequency

V/f：0~3000Hz, VC：0~300Hz

Control

Feature

Control mode

V/f, SVC, VC, Torque control

Operation command mode

Keypad control, Terminal control, Serial communication control

Frequency setting mode

Digital setting, analog setting, pulse frequency setting, serial communication setting, multi-step speed setting & simple PLC, PID setting, etc. These frequency settings can be combined & switched in various modes.

Overload capacity

150% 60s, 180% 10s, 200% 3s.

Starting torque

0Hz/180% (VC); 0.5Hz/150% (SVC)

Speed adjustment range

1:1000 (VC); 1:100 (SVC)

Speed control precision

±0.5% (SVC); ±0.02% (VC)）

Carrier frequency

0.5--16.0kHz, automatically adjusted according to temperature and load characteristics

Frequency accuracy

Digital setting: 0.01Hz

Analog setting: maximum frequency ×0.05%

Torque boost

Automatically torque boost; manually torque boost 0.1%~30.0%

V/f curve

Three types: straight line, multiple point and square type (1.2 power, 1.4 power, 1.6 power, 1.8 power, square)

ACC/DEC mode

Linear/S curve; four kinds of ACC/DEC time, range 0.1s~3600.0s

DC braking

DC braking when starting and stopping

DC braking frequency: 0.0Hz~maximum frequency, braking time: 0.0s~36.0s; Braking current: 0.0%~100.0%

Jog operation

Jog operation frequency: 0.0Hz~maximum frequencyJog ACC/DEC time: 0.1s~3600.0s

Simple PLC & multi-step

speed operation

Max. 16 steps speed running via built-in PLC or control terminal.

Built-in dual PID

Built-in PID control to easily realize the close loop control of the process parameters (such as pressure, temperature, flow, etc.)

Automatic  voltage regulation

Keep output voltage constant automatically when input voltage fluctuating

Control

Function

Common DC bus

Common DC bus for several inverters, energy balanced automatically

Torque control

Torque control with/without PG

Torque limit

"Rooter" feature, limit the torque automatically and prevent frequent over-current tripping when running

Wobble frequency control

Multiple triangular-wave frequency control, special for spinning

Timing/length/counting control

Timing/length/counting control function

Over-voltage & overcurrent stall control

Limit current & voltage automatically when running, prevent frequent over-current & over-voltage tripping

Speed tracking restart

Start the running motor smoothly without impact, protect the safety of motor and load at the most

Fault  protection function

Up to 30 fault protections including over-current, over-voltage, under-voltage, overheating, default phase, overload, shortcut, etc., can record the detailed running status during failure & has fault automatic reset function

Special

Functions

Motor switching

Two groups of motor parameters to achieve two motors switching

Spare part

Braking parts, IO extension card, differential input PG card, open collector input PG card, injection molding machine card, communication card, etc.

Powerful host software

Support KE600 parameter setting and real-time parameter monitor

Terminals

Input terminals

Programmable DI: 7 on-off inputs, 1 high-speed pulse input, can extend 3 inputs*1

2 programmable AI:

  AI1: voltage -10～10V

 A12: voltage 0～10V or current 0/4～20mA

Output terminals

1 programmable open collector output: 1 analog output (open collector output or high-speed pulse output), can extend 1 output*1

1 relay output, can extend 1 output*1

2 analog output: 0/4~20mA or 0~10V

Communication terminal*2

Offer RS485 communication interface, support MODBUS-RTU communication protocol

Human

&Machine

interface

LED display

Display frequency setting, output frequency, output voltage, output current, etc.

Multifunction key

QUICK/JOG key, can be used as multifunction key

Environment

Limit

Ambient temperature

-10℃～40℃, derated 4% when the temperature rise by each1℃ (40℃～50 ℃).

Humidity

90%RH or less (non-condensing)

Altitude

≤1000M: output rated power, ＞1000M: output derated

Storage temperature

-20℃～60℃

Storage atmosphere

Indoor, without direct sunlight, dust, corrosive gas, combustible gas, oil smoke, vapor, drip, salt, vibration, etc.